Contact
Contact
Administrative CH +41 52 212 02 77 / DE +49 2064 144 3005
T +41 52 212 02 77Technical support +41 52 511 83 11
T +41 52 511 83 11Please call me back
Please call me back
coatmaster AG
Headquarters
Flugplatzstrasse 5
CH-8404 Winterthur
+41 52 212 02 77 (Administration)
+41 52 511 83 11 (Technical Support)
Send an email to:
[email protected] (Administration)
[email protected] (Technical Support)
The coatmaster products
Advanced Thermal Optics by coatmaster
Solution for contactless coating thickness measurement.
Handheldcoatmaster Flex
- Process control
- Complete documentation
- Material saving
Technical data
|
Substrate: Metal |
|
|
Powder coatings before curing |
10 – 300 µm |
|
Wet coatings before drying |
10 – 300 µm |
|
Cured powder coatings |
10 – 500 µm |
|
Dried wet coatings |
10 – 500 µm |
|
Measuring time |
from 20 ms |
|
Distance tolerance |
2 – 15 cm |
|
Tilt tolerance |
± 70° |
|
Measurement on moving and jiggling parts |
yes |
|
Relative standard deviation* |
<2% |
|
Smallest measuring point |
2 mm |
|
Works on all colors (incl. White) |
yes |
|
Real-time data access via ERP and Internet browser |
yes |
|
Dimensions HxWxD |
374 x 91 x 203 mm |
|
Weight (without battery) |
1.3 kg |
|
Measurements/battery with application non-white |
up to 1,300 |
|
Standby time/battery |
up to 7.5 h |
Comments:
All specifications apply to a typical coating system and substrate.
The exact limits always depend on the physical properties of the coating material.
*60 µm powder coating before curing on aluminum, 5 cm working distance.
coatmaster Flex
Just pick it up and start measuring.
This handheld is the most innovative one in terms of contactless coating thickness measurement.
Would you like to measure the coating thickness early in the process in order to save material and avoid coating mistakes? Then the coatmaster Flex is the right measurement device for you.
Optimize your process and get your coatmaster Flex now.
Convince yourself of the efficiency and save up to 6’000 Euro per month of coating material per production line. Reduce rejects and increase production quality.