Contact

Contact

Administrative CH +41 52 212 02 77 / DE +49 2064 144 3005

T +41 52 212 02 77

Technical support +41 52 511 83 11

T +41 52 511 83 11

Please call me back

Please call me back

    Kontakt

    coatmaster AG
    Headquarters
    Flugplatzstrasse 5
    CH-8404 Winterthur
    +41 52 212 02 77 (Administration)
    +41 52 511 83 11 (Technical Support)
    Send an email to:
    [email protected] (Administration)
    [email protected] (Technical Support)

    The coatmaster products

    Advanced Thermal Optics by coatmaster

    The coatmaster technology (ATO) allows the thickness of the coating to be measured immediately after application. The technology operates contactless and non-destructive without dangerous emissions and is suitable for coating metal, paper, rubber, ceramics, glass, plastic and wood surfaces.

    Noncontact coating thickness measurement in laboratory and production.

    coatmasterAtline

    • Avoid rework and rejects.
    • For complex shaped parts.
    • Mobile measuring station.
    «Saves us production time by accurate measurement even with wet paint»
    Peter Gebhardt, Site & Operations Manager Production, AkzoNobel Coatings

    Technical data

    Substrate: Metal

    Powder coatings before curing

    10 – 300 µm

    Wet coatings before drying

    1 – 300 µm

    Cured powder coatings

    1 – 2000 µm

    Dried wet coatings

    1 – 2000 µm

    Substrate: Plastic/Rubber

    Wet coatings before drying

    5 – 150 μm

    Dried wet coatings

    5 – 50 μm

    Substrate: Wood/MDF

    Powder coatings before curing

    10 – 150 μm

    Wet coatings before drying

    10 – 250 μm

    Measuring time

    from 20 ms

    Distance Tolerance

    5 – 120 cm

    Tilt tolerance

    ± 70°

    Measurement on moving and jiggling parts

    yes up to 120 m/min

    Relative standard deviation*

    <1 %

    Smallest measuring point

    1 mm

    Works on all colors (incl. white)

    yes

    Real-time data access via ERP and Internet browser

    yes

    Dimensions HxWxD

    200 x 380 x 510 mm

    Weight

    16 kg

    All information applies to a typical coating system and substrate.

    The exact limits always depend on the physical properties of the coating material.

    Even if the parameters are within the specified ranges, certain combinations may not be achievable.

    For an accurate assessment, please contact coatmaster AG.

    Actual performance may vary, and specifications are subject to change without prior notice.

    *60 μm powder coating before curing on aluminium, 5 cm working distance.

    coatmaster Atline

    Coating thickness measurement for spot testing in laboratory and production.

    • Compact measurement setup
    • Reliable measurement even on complex surfaces
    • Integrated measurement database

    We use cookies and Google Analytics so that we can continually improve our website and provide you with the best possible information. By continuing to use the website, you consent to the use of the above services. For more information, please see Terms & Conditions.